Water-Cooling Submersible Pump

■ FEATURES

  1. Special water cooling designed prevents the motor from overheat.
  2. Channel impeller designed, high efficiency, power-saving, no motor overload.
  3. Input of up 1½HP models can be changed to the flange for both sucking and pumping.
  4. Connecting with the valve is used for pumping well water.

■ APPLICATION

  • Equipped with the strainer, it can be generally used for water supplying and drainage in the fish pond.
  • Over 1.1KW products, after pulling down the pump’s strainer you can install the check valve through the outlet flange interface and connect the well piping. This can use for farming irrigation to pump the groundwater and the project groundwater....ect.
  • Factory drainage wastewater, water supply for mountainside, landscaping , and gardening...etc. Use for a long time circulation water supply.

■ ATTENTION

After dismantling the pump’s strainer to use as pumping well water, the pump has to refill the water before running for the first time and then it can start pumping well water. Also, there is an option to purchase the appropriate size of “Check- Valve” accessory at local hardware stores to be added on the pump for future usage and no need to refill water again.

■ STRUCTURAL DRAWING

構造剖面圖

■ DIMENSION

外型尺寸圖

■ DIMENSION

外型尺寸圖

■ MATERIAL AND STANDARD TABLE

材質規格表

■ PERFORMANCE CURVE

性能曲線

■ SPECIFICATION

SPECIFICATION