Stainless steel SUS#316 Sump Pump

Stainless steel SUS#316 Sump Pump

■ FEATURES

1. Obtained patent by Intellectual Property Office, Ministry of Economic Affairs in Taiwan.
2. SIC mechanical seal in the stainless steel model resists moisture and corrosion.
3. Stainless steel motor housing is durable and easy to carry and move. Housing is IEC IP68.
4. Built-in thermal protector or Auto-cut prevents the motor from overheat.
5. Open suspension impeller design and water channel, so it won’t be stuck in the bottom plate.
6. Special engineering strength fiber resin impeller, plastic hose and bottom plate. It will not get rust and be wear-resistant.
7. It’s lightweight, good design, durable, and easy to use immediately, carry and move. It doesn’t need to set up and maintain.
8. The material of K & Q series volute casing is SCS 14 dewaxing precision casting. It will have high precision waterproof and no any leaking situation. It can be used in slight acid and weak base.

■ APPLICATION

1. Household wastewater, standing water in basement, sewer wastewater drainage.
2. Washing car, watering garden, flowing water of landscape.
3. Pond, septic tank and community sewage drainage.
4. Plant and general sewage pumping and sucking.
5. Weak-acid and weak-alkalinity wastewater treatment of building and animal husbandry.
6. The pumping station, wastewater treatment.
7. The base stand of Q Series allows to bigger solid passage.

■ ATTENTION

1. The Auto-cut shuts off automatically to prevent overheat whenever its voltage drops, Impeller plugged, water level under the mark and other unusual Conditions. In this case, immediately improve the use of the environment, to avoid device failure.
2. Submersible pump relies on the outside cooling water and forbids it under the mark of liquid level.
3. Don't run over 24 hours. The proper use will extend the lifetime.
4. This model is used to weak-acid and weak-alkalinity wastewater. If draining high corrosive liquid, use other pumps made of special materials.

■ SPECIFICATION